Owners Manual

20
c. Install the CMA connector beside the center CMA body (E) to the CMA connector base on the
outer member (F).
F
E
4. Release the CMA.
a. To release the outer member, press the PUSH button on tthe CMA plug-in part to draw it out.
2
1
Then turn the CMA 90 degrees to the right, and press the PUSH button on the CMA plug-in part
to draw it out.
B
A
2
1
b. To release the inner member, press the PUSH button on the CMA plug-in part to draw it out.
1
2
Setting up and configuring the iDRAC IP address
You can set up the Integrated Dell Remote Access Controller (iDRAC) IP address by using one of the
following interfaces: