Owners Manual

119
Memory
Architecture 1333 MT/s, 1600 MT/s, 1866 MT/s, 2133 MT/s, or
2400 MT/s DDR4 Registered DIMMs
Support for advanced ECC or memory optimized
operation
Memory module sockets 12 288-pin
Memory module capacities (RDIMMs) 16 GB (single- and dual-rank) and 32 GB (single-
and dual-rank)
Minimum RAM 16 GB with single processor
32 GB with dual processor
Maximum RAM Up to 192 GB with single processor
Up to 384 GB with dual processor
Power
AC power supply (per PSU)
Wattage 1100 W (for dual-node systems) or
1600 W (for single-node systems)
Power rating per PSU 1100 W (for dual-node systems) (Platinum) AC
(200 – 240 V, 50/60 Hz, 6.5 A) or
1600 W (for single-node systems) (Gold) AC
(200 – 240 V, 50/60 Hz, 10.0 A)
Heat dissipation
NOTE: This system is also designed to be
connected to IT power systems with a phase
to phase voltage not exceeding 230 V.
4170 BTU/hr maximum (1100 W PSU) or
6060 BTU/hr maximum (1600 W PSU)
Voltage 200 – 240 V AC, autoranging, 50/60 Hz
RAID Controller
Controller type PMC 8805, LSI 9361-8i or LSI 9311
Drives
Single-node systems with one server sled Up to 90 3.5-inch hot-swappable Serial Attached
SCSI (SAS) HDDs, SATA HDDs, or SATA SSDs, or
Up to 16 hot-swappable SAS SSDs
Up to two 2.5-inch hot-swappable boot SATA SSDs