Owners Manual

Figure 35. Removing a cooling fan
1.
cooling fans (6) 2. cooling fan release tab
3. cooling fan cable connector 4. cooling fan connector on the system board
Next steps
1. If applicable, install the PCIe expansion card riser.
2. Reinstall the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 53
Related tasks
Before working inside your system on page 53
Removing the dual riser module (optional) on page 92
Removing the internal PERC riser on page 94
Removing the cooling shroud on page 59
Installing a cooling fan on page 87
Installing the cooling shroud on page 60
Installing the internal PERC riser on page 95
Installing the dual riser module (optional) on page 93
After working inside your system on page 54
86
Installing and removing system components