Owners Manual

Related references
Miscellaneous Settings on page 48
Related tasks
Viewing Miscellaneous Settings on page 49
iDRAC Settings utility
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable
various iDRAC parameters by using the iDRAC settings utility.
NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/
idracmanuals.
Related concepts
Device Settings on page 51
Related references
System BIOS on page 27
Related tasks
Entering the iDRAC Settings utility on page 50
Changing the thermal settings on page 50
Entering the iDRAC Settings utility
Steps
1. Turn on or restart the managed system.
2. Press F2 during Power-on Self-test (POST).
3. On the System Setup Main Menu page, click iDRAC Settings.
The iDRAC Settings screen is displayed.
Related references
iDRAC Settings utility on page 50
Changing the thermal settings
The iDRAC settings utility enables you to select and customize the thermal control settings for your system.
1. Click iDRAC Settings > Thermal.
2. Under SYSTEM THERMAL PROFILE > Thermal Profile, select one of the following options:
● Default Thermal Profile Settings
● Maximum Performance (Performance Optimized)
● Minimum Power (Performance per Watt Optimized)
3. Under USER COOLING OPTIONS, set the Fan Speed Offset, Minimum Fan Speed, and Custom Minimum Fan Speed.
4. Click Back > Finish > Yes.
Related references
iDRAC Settings utility on page 50
50
Pre-operating system management applications