Owners Manual

1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
Steps
1. Unpack the new system board assembly.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the
chassis.
2. Hold the system board and lower it into the chassis.
3. Push the system board toward the back of the chassis until the board clicks into place.
Figure 78. Installing the system board
a. system board
4. Install the screws that secure the system board onto the chassis.
138
Installing and removing system components