Owners Manual

Table 5. Hard drive indicator codes (continued)
Drive-status indicator pattern Condition
Off Drive ready for insertion or removal.
NOTE: The drive status indicator remains off until all hard
drives are initialized after the system is turned on. Drives are
not ready for insertion or removal during this time.
Flashes green, amber, and then turns off Predicted drive failure
Flashes amber four times per second Drive failed
Flashes green slowly Drive rebuilding
Steady green Drive online
Flashes green for three seconds, amber for three
seconds, and then turns off after six seconds
Rebuild stopped
NIC indicator codes
The NIC on the back panel has an indicator that provides information about the network activity and link status. The activity
LED indicates whether the NIC is currently connected or not. The link LED indicates the speed of the connected network.
Figure 6. NIC Indicator Codes
1. link indicator
2. activity indicator
Table 6. NIC indicators
Convention Status Condition
A Link and activity indicators are off.
The NIC is not connected to the network.
B Link indicator is green. The NIC is connected to a valid network at its maximum
port speed (1 Gbps or 10 Gbps).
C Link indicator is amber The NIC is connected to a valid network at less than its
maximum port speed.
D Activity indicator is flashing. green Network data is being sent or received.
Dell DSS 2500 system overview 13