Owners Manual

Figure 59. Removing the eight 2.5-inch SAS/SATA backplane

1. hard drive/SSD backplane 2. backplane power cable

3. backplane signal cable 4. SAS_A cable connector

5. release tab (2) 6. SAS_B cable connector

7. hard drive/SSD connector (8)

Figure 60. Cabling diagram—Eight 2.5-inch SAS/SATA backplane

expansion card 2. SAS_ B connector on the expansion card

3. SAS_ A connector on the expansion card 4. cable routing latch

Installing and removing system components 105