Owners Manual

Figure 4. LCD panel features
Table 3. LCD panel features
Item Button Description
1 Left Moves the cursor back in one-step increments.
2 Select Selects the menu item highlighted by the cursor.
3 Right Moves the cursor forward in one-step increments.
During message scrolling:
● Press and hold the button to increase scrolling speed.
● Release the button to stop.
NOTE: The display stops scrolling when the button is released. After 45
seconds of inactivity, the display starts scrolling.
Related references
Setup menu on page 15
View menu on page 15
Related tasks
Viewing Home screen on page 14
Viewing Home screen
The Home screen displays user-configurable information about the system. This screen is displayed during normal system
operation when there are no status messages or errors. When the system turns off and there are no errors, LCD enters the
standby mode after five minutes of inactivity. Press any button on the LCD to turn it on.
Steps
1. To view the Home screen, press one of the three navigation buttons (Select, Left, or Right).
2. To navigate to the Home screen from another menu, complete the following steps:
a. Press and hold the navigation button till the up arrow
is displayed.
b. Navigate to the using the up arrow
c. Select the Home icon.
d. On the Home screen, press the Select button to enter the main menu.
Related references
LCD panel on page 13
Setup menu on page 15
View menu on page 15
14
Dell PowerEdge R730 system overview