Users Guide

Adding and Configuring DRAC 5 Users 97
User Name Specifies a DRAC 5 user name with up to 16 characters.
Each user must have a unique user name.
NOTE: User names on the local DRAC 5 cannot include
the @ (at the rate) , \ (back slash) , " (double quotes), /
(forward slash), or . (period) characters.
NOTE: If the user name is changed, the new name will
not appear in the user interface until the next user login.
Change Password Enables the New Password and Confirm New Password
fields. When unchecked, the user’s Password cannot be
changed.
New Password Specifies or edits the DRAC 5 user's password.
Confirm New Password Requires you to retype the DRAC 5 user's password to
confirm.
Table 5-3. IPMI User Privileges
Property Description
Maximum LAN User
Privilege Granted
Specifies the user’s maximum privilege on the IPMI
LAN channel to one of the following user groups:
Administrator, Operator, User, or None.
Maximum Serial Port
User Privilege Granted
Specifies the user’s maximum privilege on the IPMI
Serial channel to one of the following: Administrator,
Operator, User, or None.
Enable Serial Over LAN Allows user to use IPMI Serial Over LAN. When
checked, this privilege is enabled.
Table 5-2. General Properties
(continued)
Property Description