Users Guide

316 RACADM Subcommand Overview
Gateway = 192.168.0.1
Supported Interfaces
•Local RACADM
• Remote RACADM
• Telnet/SSH/Serial RACADM
getsvctag
NOTE: To use this command, you must have Log In To DRAC 5 permission.
Table A-22 describes the getsvctag subcommand.
Synopsis
racadm getsvctag
Description
The getsvctag subcommand displays the service tag of the host system.
Example
Ty p e getsvctag at the command prompt. The output is displayed as follows:
Y76TP0G
The command returns 0 on success and nonzero on errors.
Supported Interfaces
•Local RACADM
• Remote RACADM
• Telnet/SSH/Serial RACADM
Table A-22. getsvctag
Subcommand Definition
getsvctag Displays a service tag.