Users Guide

RACADM Subcommand Overview 313
Supported Interfaces
• Remote RACADM
• Telnet/SSH/Serial RACADM
ping
NOTE: To use this command, you must have Execute Diagnostic Commands or
Configure DRAC 5 permission.
Table A-19 describes the ping subcommand.
Synopsis
racadm ping <ipaddress>
Supported Interfaces
• Remote RACADM
• Telnet/SSH/Serial RACADM
Table A-19. ping
Subcommand Definition
ping Verifies that the destination IP address is reachable from the
DRAC 5 with the current routing-table contents. A destination
IP address is required. An ICMP echo packet is sent to the
destination IP address based on the current routing-table
contents.