Users Guide

306 RACADM Subcommand Overview
• racadm fwupdate -p -u -d c:\ <images>
In this example, the firmware image for the update is provided by the
host’s file system.
• racadm -r 192.168.0.120 -u root -p racpassword
fwupdate -g -u -a 192.168.0.120 -d <images>
In this example, RACADM is used to remotely update the firmware of a
specified DRAC using the provided DRAC username and password.
The image is retrieved from a TFTP server.
NOTE: The -p option is supported in local and remote RACADM and is not
supported with the serial/telnet/ssh console. The -p option is not supported on the
Linux platform.
getssninfo
NOTE: To use this command, you must have Log In To DRAC 5 permission.
Table A-11 describes the getssninfo subcommand.
Synopsis
racadm getssninfo [-A] [-u <username> | *]
Description
The getssninfo command returns a list of users that are connected to the
DRAC. The summary information provides the following information:
•Username
• IP address (if applicable)
• Session type (for example, serial or telnet)
• Consoles in use (for example, Virtual Media or Virtual KVM)
Table A-11. getssninfo Subcommand
Subcommand Definition
getssninfo Retrieves session information for one or more
currently active or pending sessions from the
Session Manager's session table.