Users Guide

294 Sensors
Power Statistics
The Power Statistics page displays the average power consumption and the
maximum and the minimum power consumption statistics for the system in
Watts and BTU/Hr (British Thermal Unit per Hour) over the last 1 hour,
1 day, or 1 week from the current DRAC time. The data is obtained by the
DRAC 5 and is reset if the DRAC undergoes a reset for any reason.
Temperature Probes
The temperature sensor provides information about the system board
ambient temperature. The temperature probes indicate whether the status of
the probes is within the pre-set warning and critical threshold value.
Voltage Probes
The following are typical voltage probes. Your system may have these and/or
others present.
• CPU [n] VCORE
• System Board 0.9V PG
• System Board 1.5V ESB2 PG
• System Board 1.5V PG
• System Board 1.8V PG
• System Board 3.3V PG
• System Board 5V PG
• System Board Backplane PG
• System Board CPU VTT
• System Board Linear PG
The voltage probes indicate whether the status of the probes is within the
pre-set warning and critical threshold values.