Users Guide

Configuring Intelligent Platform Management Interface (IPMI) 275
Configuring Serial Over LAN
NOTE: For complete Serial Over LAN information, see the Dell OpenManage
Baseboard Management Controller User’s Guide.
1 Expand the System tree and click Remote Access .
2 Click the Configuration tab and then click Serial Over LAN .
3 Configure the Serial Over LAN settings.
Table 15-1 provides information about the
Serial Over LAN
Configuration
page settings.
4 Click Apply Changes .
5 Configure the advanced settings, if required. Otherwise, click the
appropriate
Serial Over LAN Configuration page button to continue
(see Table 15-2).
To configure the advanced settings:
a Click Advanced Settings .
b In the Serial Over LAN Configuration Advanced Settings page,
configure the advanced settings as required. See Table 15-3.
c Click Apply Changes .
d Click the appropriate Serial Over LAN Configuration Advanced
Settings
page button to continue. See Table 15-4 or description of the
Serial Over LAN Configuration Advanced Settings page buttons.
Table 15-1. Serial Over LAN Configuration Page Settings
Setting Description
Enable Serial Over
LAN
Enables Serial Over LAN. Checked=Enabled;
Unchecked=Disabled.
Baud Rate The IPMI data speed. Select 9600 bps, 19.2 kbps, 57.6
kbps, or 115.2 kbps.
Channel Privilege
Level Limit
Sets the IPMI Serial Over LAN minimum user privilege:
Administrator, Operator, or User.