Users Guide

Configuring Intelligent Platform Management Interface (IPMI) 267
15
Configuring Intelligent Platform
Management Interface (IPMI)
Configuring IPMI
This section provides information about configuring and using the DRAC 5
IPMI interface. The interface includes the following:
• IPMI over LAN
• IPMI over Serial
•Serial over LAN
The DRAC 5 is fully IPMI 2.0 compliant. You can configure the DRAC
IPMI using:
•your browser
• an open source utility, such as
ipmitool
• the Dell OpenManage IPMI shell, ipmish
•RACADM
For more information about using the IPMI Shell, ipmish, see the Dell
OpenManage BMC User's Guide located on the Dell Support website at
support.dell.com/manuals.
For more information about using RACADM, see "Using RACADM
Remotely" on page 78.
Configuring IPMI Using the Web-Based Interface
1 Login to the remote system using a supported Web browser.
See "Accessing the Web-Based Interface" on page 48.
2 Configure IPMI over LAN.
a In the System tree, click Remote Access .
b Click the Configuration tab and click Network .