Users Guide

266 Monitoring and Alert Management
You can change the DRAC 5 community name using RACADM.
To see the DRAC 5 community name, use the following command:
racadm getconfig -g cfgOobSnmp
To set the DRAC 5 community name, use the following command:
racadm config -g cfgOobSnmp -o
cfgOobSnmpAgentCommunity <community name>
To prevent SNMP authentication traps from being generated, you must enter
community names that will be accepted by the agent. Since the DRAC 5 only
allows one community name, you must use the same get and set community
name for IT Assistant discovery setup.