Release Notes

file:///T|/htdocs/SOFTWARE/smdrac3/drac5/160/en/readme/readme.txt[10/26/2012 2:01:37 PM]
error was not acknowledged and you repeat this procedure, the
"Console Redirection" page loads, even though the plug-in
installation fails during your first attempt. This issue occurs
because the Web browser stores the plug-in information in the
profile directory even though the plug-in installation procedure
had failed. To fix this issue, install and run a supported
32-bit Web browser and log into the DRAC 5.
* If you are running Console Redirection on a Red Hat Enterprise Linux
(version 4) client with a Simplified Chinese GUI, the viewer menu
and title may appear in random characters. This issue is caused by
an incorrect encoding in the Red Hat Enterprise Linux (version 4)
Simplified Chinese operating system. To fix this issue, access and
modify the current encoding settings by performing the following
steps:
1. Open a command terminal.
2. Type "locale" and press <Enter>.
The following output appears.
LANG=zh_CN.UTF-8
LC_CTYPE="zh_CN.UTF-8"
LC_NUMERIC="zh_CN.UTF-8"
LC_TIME="zh_CN.UTF-8"
LC_COLLATE="zh_CN.UTF-8"
LC_MONETARY="zh_CN.UTF-8"
LC_MESSAGES="zh_CN.UTF-8"
LC_PAPER="zh_CN.UTF-8"
LC_NAME="zh_CN.UTF-8"
LC_ADDRESS="zh_CN.UTF-8"
LC_TELEPHONE="zh_CN.UTF-8"
LC_MEASUREMENT="zh_CN.UTF-8"
LC_IDENTIFICATION="zh_CN.UTF-8"
LC_ALL=
3. If the values include "zh_CN.UTF-8", no changes are required.
If the values do not include "zh_CN.UTF-8", go to step 4.
4. Navigate to the “/etc/sysconfig/i18n” file.
5. In the file, apply the following changes:
Current entry:
LANG="zh_CN.GB18030"
SUPPORTED="zh_CN.GB18030:zh_CH.GB2312:zh_CN:zh"
Updated entry:
LANG="zh_CN.UTF-8"
SUPPORTED="zh_CN.UTF-8:zh_CN.GB18030:zh_CH.GB2312:zh_CN:zh"
6. Log out and then login to the operating system.
7. Relaunch the DRAC 5.
When you switch from any other language to the Simplified Chinese
language, ensure that this fix is still valid. If not, repeat the
procedure. (53205)
* The Linux operating system mouse settings are used to control the
mouse arrow in the DRAC 5 Console Redirection screen. If the user or
the Linux operating system (Red Hat or SUSE) changes the default