Users Guide

DRAC 5 Property Database Group and Object Definitions 381
Description
When the DRAC 5 cfgSerialConsoleEnable property is set to 0 (disabled),
the DRAC 5 serial port becomes the IPMI serial port. This property
determines the IPMI defined mode of the serial port.
In Basic mode, the port uses binary data with the intent of communicating
with an application program on the serial client. In Terminal mode, the port
assumes that a dumb ASCII terminal is connected and allows very simple
commands to be entered.
cfgIpmiSerialBaudRate (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
9600, 19200, 57600, 115200
Default
57600
Description
Specifies the baud rate for a serial connection over IPMI.
cfgIpmiSerialChanPrivLimit (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
2 (User)
3 (Operator)
4 (Administrator)
Default
4
Description
Specifies the maximum privilege level allowed on the IPMI serial channel.