Users Guide
324 RACADM Subcommand Overview
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
vmdisconnect
NOTE: To use this command, you must have Access Virtual Media permission.
Table A-50 describes the vmdisconnect subcommand.
Synopsis
racadm vmdisconnect
Description
The vmdisconnect subcommand allows a user to disconnect another user's
virtual media session. Once disconnected, the web-based interface will reflect
the correct connection status. This is available only through the use of local or
remote racadm.
The vmdisconnect subcommand enables a RAC user to disconnect all active
virtual media sessions. The active virtual media sessions can be displayed in
the RAC web-based interface or by using the racadm getsysinfo
subcommand.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Table A-50. vmdisconnect
Subcommand Description
vmdisconnect Closes all open RAC virtual media connections from remote
clients.