Users Guide
322 RACADM Subcommand Overview
Options
Table A-46 describes the testemail subcommand options.
Output
None.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
testtrap
NOTE: To use this command, you must have Test Alerts permission.
Table A-47 describes the testtrap subcommand.
Ensure the SNMP IP
address is configured
properly
racadm config -g cfgRemoteHosts -o
cfgRhostsSmptServerIpAddr -i
192.168.0.152
View the current e-mail
alert settings
racadm getconfig -g cfgEmailAlert -i
<index>
where
<index>
is a number from 1 to 4
Table A-46. testemail Subcommands
Option Description
-i Specifies the index of the e-mail alert to test.
Table A-47. testtrap
Subcommand Description
testtrap Tests the RAC’s SNMP trap alerting feature.
Table A-45. testemail Configuration (continued)
Action Command