Users Guide

Configuring Intelligent Platform Management Interface
Configuring Intelligent Platform
Management Interface (IPMI)
Configuring IPMI
This section provides information about configuring and using the DRAC 5
IPMI interface. The interface includes the following:
• IPMI over LAN
• IPMI over Serial
• Serial over LAN
The DRAC 5 is fully IPMI 2.0 compliant. You can configure the DRAC IPMI
using:
• your browser
• an open source utility, such as
ipmitool
• the Dell OpenManage IPMI shell, ipmish
• RACADM.
For more information about using the IPMI Shell, ipmish, see the Dell
OpenManage™ BMC User's Guide located on the Dell Support website at
support.dell.com.
For more information about using RACADM, see "Using RACADM
Remotely."
Configuring IPMI Using the Web-Based Interface
1 Login to the remote system using a supported Web browser. See
"Accessing the Web-Based Interface".
2 Configure IPMI over LAN.
a In the System tree, click Remote Access .
b Click the Configuration tab and click Network .