Users Guide

DRAC 5 Overview 25
The DRAC 5 includes one onboard 10/100 Mbps RJ-45 NIC, a 50-pin
management cable, and a 44-pin MII cable. See Figure 1-1 for the DRAC 5
cable connectors.
The 50-pin management cable is the main interface to the DRAC that
provides connectivity to USB, serial, video, and an inter-integrated circuit
(I2C) bus. The 44-pin MII cable connects the DRAC NIC to the system’s
motherboard. The RJ-45 connector connects the DRAC NIC to an out-of-
band connection when the DRAC 5 is configured in Dedicated NIC mode.
Depending on your requirements, you can use the management and MII
cables to configure your DRAC in three separate modes. See "DRAC Modes"
for more information.
DRAC 5 Ports
Table 1-2 identifies the ports used by the DRAC 5 that listen for a server
connection. Table 1-3 identifies the ports that the DRAC 5 uses as a client.
This information is required when opening firewalls for remote access to a
DRAC 5.
Table 1-2. DRAC 5 Server Listening Ports
Port Number Function
22* Secure Shell (SSH)
23* Teln et
80* HTTP
161 SNMP Agent
443* HTTPS
623 RMCP/RMCP+
3668* Virtual Media server
3669* Virtual Media Secure Service
5900* Console Redirection keyboard/mouse
5901* Console Redirection video
* Configurable port