Users Guide

Monitoring and Alert Management 245
• Redundancy Degraded
• Redundancy Lost
• Processor Warning
• Processor Failure
• Processor Absent
• PS/VRM/D2D Warning
• PS/VRM/D2D Failure
• Power Supply Absent
• Hardware Log Failure
• Automatic System Recovery
When a platform event occurs (for example, a fan probe failure), a system
event is generated and recorded in the System Event Log (SEL). If this event
matches a platform event filter (PEF) in the Platform Event Filters list in the
Web-based interface and you have configured this filter to generate an alert
(PET or e-mail), then a PET or e-mail alert is sent to a set of one or more
configured destinations.
If the same platform event filter is also configured to perform an action (such
as rebooting the system), the action is performed.
Configuring Platform Event Filters (PEF)
Configure your platform event filters before you configure the platform event
traps or e-mail alert settings.
Configuring PEF Using the Web User Interface
1 Log in to the remote system using a supported Web browser. See
"Accessing the Web-Based Interface".
2 Click the Alert Management tab and then click Platform Events .
3 Enable global alerts.
a Click Alert Management and select Platform Events .
b Select the Enable Platform Event Filter Alert check box.
4 Under Platform Events Filters Configuration , select the Enable Platform
Event Filter alerts
check box and then click Apply Changes .