Users Guide

222 Using the DRAC 5 SM-CLP Command Line Interface
SM-CLP Output Format
The DRAC 5 currently supports text-based output as described in the
SM-CLP specifications.
/system1/pwrmgtsvc1/
pwrmgtcap1
Capabilities of the power management service for
the system.
/system1/fan1 A fan target on the managed system.
/system1/fan1/
tachsensor1
An individual sensor target on the fan target on the
managed system.
/system1/batteries1 A battery target on the managed system.
/system1/batteries1/
sensor1
An individual sensor target on the battery target on
the managed system.
/system1/intrusion1 A chassis intrusion target on the managed system.
/system1/intrusion1/
sensor1
An individual sensor target on the chassis intrusion
target on the managed system.
/system1/hardwareperfor
mance1
A hardware performance target on the managed
system.
/system1/hardwareperfor
mance1/sensor1
An individual sensor target on the hardware
performance target on the managed system.
/system1/powersupplies1 A power supply target on the managed system.
/system1/powersupplies1
/sensor1
An individual sensor target on the power supply
target on the managed system.
/system1/temperatures1 A temperature target on the managed system.
/system1/temperatures1/
tempsensor1
An individual sensor target on the temperature
target on the managed system.
/system1/voltages1 A voltage target on the managed system.
/system1/voltages1/volt
sensor1
An individual sensor target on the voltage target on
the managed system.
/system1/chassis1 An individual chassis target of the system.
Table 12-4. SM-CLP Targets (continued)
Target Definition