Users Guide

Configuring Security Features 211
Table 11-10. Telnet Settings
Setting Description
Enabled Enables or disables Telnet. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Up to four sessions are supported.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The Secure Shell idle timeout, in seconds. Range = 60 to
1920 seconds. Enter 0 seconds to disable the Timeout
feature. The default setting is 0.
Port Number The port used by the DRAC that listens for a server
connection. The default setting is 23.
Table 11-11. Remote RACADM Settings
Setting Description
Enabled Enables or disables remote RACADM. Checked=
Enabled; Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Up to four sessions are supported.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Table 11-12. SNMP Agent Settings
Setting Description
Enabled Enables or disables the SNMP agent. Checked=Enabled;
Unchecked=Disabled.
Community Name The name of the community that contains the IP address
for the SNMP Alert destination. The Community Name
can be up to 31 non-blank characters in length. The
default setting is public.