Users Guide
210 Configuring Security Features
Table 11-8. Web Server Settings
Setting Description
Enabled Enables or disables the Web server. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The time in seconds that a connection is allowed to
remain idle. The session is cancelled when the timeout is
reached. Changes to the timeout setting do not affect the
current session. When you change the timeout setting,
you must log out and log in again to make the new setting
effective. Timeout range is 60 to 1920 seconds.
HTTP Port Number The port used by the DRAC that listens for a server
connection. The default setting is 80.
HTTPS Port Number The port used by the DRAC that listens for a server
connection. The default setting is 443.
Table 11-9. SSH Settings
Setting Description
Enabled Enables or disables SSH. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Up to four sessions are supported.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The Secure Shell idle timeout, in seconds. Range = 60 to
1920 seconds. Enter 0 seconds to disable the Timeout
feature. The default setting is 300.
Port Number The port used by the DRAC that listens for a server
connection. The default setting is 22.