Users Guide

Configuring Security Features 209
Configuring Services
NOTE: To modify these settings, you must have Configure DRAC 5 permission.
Additionally, the remote RACADM command-line utility can only be enabled if the
user is logged in as root.
1 Expand the System tree and click Remote Access.
2 Click the Configuration tab and then click Services.
3
Configure the following services as required:
• Local Configuration (Table 11-7)
• Web server (Table 11-8)
• SSH (Table 11-9)
• Telnet (Table 11-10)
• Remote RACADM (Table 11-11)
• SNMP agent (Table 11-12)
• Automated System Recovery Agent (Table 11-13)
Use the
Automated Systems Recovery Agent to enable the Last Crash
Screen
functionality of the DRAC 5.
NOTE: Server Administrator must be installed with its Auto Recovery feature
activated by setting the Action to either: Reboot System, Power Off System, or
Power Cycle System, for the Last Crash Screen to function in the DRAC 5.
4 Click Apply Changes .
5 Click the appropriate Services page button to continue. See Table 11-14.
Table 11-7. Local Configuration Settings
Setting Description
Disable the DRAC local
configuration using option
ROM
Disables local configuration of the DRAC 5 using
option ROM. The option ROM prompts you to
enter the setup module by pressing <Ctrl+E>
during system reboot.
Disable the DRAC local
configuration using
RACADM
Disables local configuration of the DRAC 5 using
local RACADM.