Users Guide

Using GUI Console Redirection 157
The buttons in Table 9-5 are available on the Console Redirection page.
4
If a console redirection session is available, click Connect .
If your system is running on Linux and you had selected to install the Java
plug-in in the
Console Redirect Configuration page, a message is
displayed prompting you to
Open or Save the .jnlp file on the system. If
you choose to save the
.jnlp file, manually run the saved file by double-
clicking it. If you download the
.jnlp file and don’t run it, the status of the
Console Redirection will always display
Connecting .
If your system is running on Windows and you had selected to install the
Java plug-in in the
Console Redirect Configuration page, the system saves
the
.jnlp file and runs it automatically.
NOTE: If JVM is not installed on your system and you click Connect, the
status of the Console Redirection is displayed as Connecting until you click
Disconnect.
Local Server Video
Enabled
Yes/No
Status Connected or Disconnected
Max Sessions The maximum number of supported console redirection sessions
Active Sessions The current number of active console redirection sessions
Plug-in Type The plug-in type you selected in the Console Redirect
Configuration page.
Table 9-5. Console Redirection Page Buttons
Button Definition
Refresh Reloads the Console Redirection Configuration page
Connect Opens a console redirection session on the targeted
remote system.
Print Prints the Console Redirection Configuration page.
Table 9-4. Console Redirection Page Information (continued)
Property Description