Users Guide

144 Configuring Smart Card Authentication
Logging Into the DRAC 5 Using the Smart Card
The DRAC 5 Web interface displays the Smart Card logon page for all users
who are configured to use the Smart Card.
NOTE: Ensure that the DRAC 5 local user and/or Active Directory configuration is
complete before enabling the Smart Card Logon for the user.
NOTE: Depending on your browser settings, you may be prompted to download and
install the Smart Card reader ActiveX plug-in when using this feature for the first time.
Figure 7-2. Logging into the DRAC 5 Using the Smart Card
1
Access the DRAC 5 Web page using https.
https://<
IP address>
If the default HTTPS port number (port 443) has been changed, type:
https://<
IP address>
:<
port number
>
where
IP address
is the IP address for the DRAC 5 and
port number
is the HTTPS port number.
The DRAC 5 Login page appears prompting you to insert the Smart Card.