Users Guide

Using the DRAC 5 With Microsoft Active Directory 127
Configuring Active Directory (Standard Schema and Extended Schema)
1 In the Active Directory Main Menu page, select Configure Active
Directory
and click Next .
2 In the Active Directory Configuration and Management page, enter the
Active Directory settings.
Table 6-10 describes the
Active Directory Configuration and
Management
page settings.
3 Click Apply to save the settings.
4 Click the appropriate Active Directory Configuration page button to
continue. See Table 6-11.
5 To configure the Role Groups for Active Directory Standard Schema, click
on the individual Role Group (1-5). See Table 6-12 and Table 6-13.
NOTE: To save the settings on the Active Directory Configuration and
Management page, you have to click Apply before proceeding to the Custom
Role Group page.
Table 6-10. Active Directory Configuration and Management Page Settings
Setting Description
Enable Active
Directory
Enables Active Directory. Checked=Enabled;
Unchecked=Disabled.
ROOT Domain Name The Active Directory ROOT domain name. This value is
NULL by default.
The name must be a valid domain name consisting of x.y,
where x is a 1-254 character ASCII string with no blank
spaces between characters, and y is a valid domain type
such as com, edu, gov, int, mil, net, org.
Timeout The time in seconds to wait for Active Directory queries
to complete. Minimum value is equal to or greater than 15
seconds. The default value is 120 seconds.
Use Standard Schema Uses Standard Schema with Active Directory
Use Extended Schema Uses Extended Schema with Active Directory