Users Guide

50 Installing and Setting Up the DRAC 5
You can access the DRAC 5 Web-based interface through the DRAC 5 NIC
by using a supported Web browser, or through Server Administrator or
IT Assistant.
See "Supported Web Browsers" on page 29 for a list of supported Web
browsers.
To access the DRAC 5 using a supported Web browser, see "Accessing the
Web-Based Interface" on page 91.
To access the DRAC 5 remote access interface using Server Administrator,
launch Server Administrator. From the system tree on the left pane of the
Server Administrator home page, click System→ Main System Chassis→
Remote Access Controller. For more information, see your Server
Administrator User’s Guide.
For information about accessing the DRAC 5 using RACADM, see "Using the
RACADM Command Line Interface" on page 209.
Configuring IPMI
This section provides information about configuring and using the DRAC 5
IPMI interface. The interface includes the following:
• IPMI over LAN
• IPMI over Serial
• Serial over LAN
The DRAC5 is fully IPMI 2.0 compliant. You can configure the DRAC IPMI
using your browser; using an open source utility, such as ipmitool; using the
Dell OpenManage IPMI shell, ipmish; or using RACADM.
For more information about using the IPMI Shell, ipmish, see the Dell
OpenManage™ BMC User's Guide located on the Dell Support website at
support.dell.com.
For more information about using RACADM, see "Using RACADM" on
page 210.