Users Guide

42 Installing and Setting Up the DRAC 5
For help with the RACADM command, type racadm help after issuing the
previous commands. For more information about RACADM, see "Using the
RACADM Command Line Interface" on page 209.
Uninstalling RACADM
To uninstall RACADM, open a command prompt and type:
rpm -e <racadm_package_name>
where <racadm_package_name> is the rpm package that was used to
install the RAC software.
For example, if the rpm package name is srvadmin-racadm5, then type:
rpm -e srvadmin-racadm5
Configuring a Supported Web Browser
The following sections provide instructions for configuring the supported
Web browsers. For a list of supported Web browsers, see "Supported Web
Browsers" on page 29.
Configuring Your Web Browser to Connect to the Web-Based Interface
If you are connecting to the DRAC 5 Web-based interface from a
management station that connects to the Internet through a proxy server, you
must configure the Web browser to access the Internet from this server.
To configure your Internet Explorer Web browser to access a proxy server,
perform the following steps:
1
Open a Web browser window.
2 Click Tools , and click Internet Options .
3 From the Internet Options window, click the Connections tab.
4 Under Local Area Network (LAN) settings , click LAN Settings .
5 If the Use a proxy server box is selected, select the Bypass proxy server for
local addresses
box.
6 Click OK twice.