Users Guide

DRAC 5 Property Database Group and Object Definitions 343
cfgIpmiSerial
This group specifies properties used to configure the IPMI serial interface of
the BMC.
cfgIpmiSerialConnectionMode (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
0 (Terminal)
1 (Basic)
Default
1
Description
When the DRAC 5 cfgSerialConsoleEnable property is set to 0 (disabled),
the DRAC 5 serial port becomes the IPMI serial port. This property
determines the IPMI defined mode of the serial port.
In Basic mode, the port uses binary data with the intent of communicating
with an application program on the serial client. In Terminal mode, the port
assumes that a dumb ASCII terminal is connected and allows very simple
commands to be entered.
Clear Logs 0x00000008
Execute Server Control Commands 0x00000010
Access Console Redirection 0x00000020
Access Virtual Media 0x00000040
Test Alerts 0x00000080
Execute Debug Commands 0x00000100
Table B-4. Bit Masks for Role Group Privileges
(continued)
Role Group Privilege Bit Mask