Users Guide

RACADM Subcommand Overview 285
Options
Table A-44 describes the testemail subcommand options.
Output
None.
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
testtrap
NOTE: To use this command, you must have Test Alerts permission.
Table A-45 describes the testtrap subcommand.
Ensure the SNMP IP
address is configured
properly
racadm config -g cfgRemoteHosts -o
cfgRhostsSmptServerIpAddr -i
192.168.0.152
View the current e-mail
alert settings
racadm getconfig -g cfgEmailAlert -i
<index>
where <index> is a number from 1 to 4
Table A-44. testemail Subcommands
Option Description
-i Specifies the index of the e-mail alert to test.
Table A-45. testtrap
Subcommand Description
testtrap Tests the RAC’s SNMP trap alerting feature.
Table A-43. testemail Configuration
Action Command