Users Guide

276 RACADM Subcommand Overview
Output
The default output display shows the record number, timestamp, source, and
description. The timestamp begins at midnight, January 1 and increases until
the system boots. After the system boots, the system’s timestamp is used.
For example:
Record: 1
Date/Time: Dec 8 08:21:30
Source: ssnmgrd[175]
Description: root from 143.166.157.103: session
timeout sid 0be0aef4
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
sslcsrgen
NOTE: To use this command, you must have Configure DRAC 5 permission.
Table A-32 describes the sslcsrgen subcommand.
Synopsis
racadm sslcsrgen [-g] [-f <filename>]
racadm sslcsrgen -s
Table A-32. sslcsrgen
Subcommand Description
sslcsrgen Generates and downloads an SSL certificate
signing request (CSR) from the RAC.