Users Guide

274 RACADM Subcommand Overview
-s — Specifies the starting record used for the display
-E — Places the 16 bytes of raw SEL at the end of each line of output as a
sequence of hex values.
-R — Only the raw data is printed.
-m — Displays one screen at a time and prompts the user to continue (similar
to the UNIX more command).
NOTE: If no arguments are specified, the entire log is displayed.
Output
The default output display shows the record number, timestamp, severity, and
description.
For example:
Record: 1
Date/Time: 11/16/2005 22:40:43
Severity: Ok
Description: System Board SEL: event log sensor for
System Board, log cleared was asserted
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
clrsel
NOTE: To use this command, you must have Clear Logs permission.
Synopsis
racadm clrsel
Description
The clrsel command removes all existing records from the system event log (SEL).