Users Guide

272 RACADM Subcommand Overview
Synopsis
racadm getraclog -i
racadm getraclog [-A] [-o] [-c count] [-s start-
record] [-m]
Description
The getraclog -i command displays the number of entries in the DRAC 5 log.
The following options allow the getraclog command to read entries:
• -A — Displays the output with no headers or labels.
•
-c — Provides the maximum count of entries to be returned.
•
-m — Displays one screen of information at a time and prompts the user
to continue (similar to the UNIX
more command).
•
-o — Displays the output in a single line.
•
-s — Specifies the starting record used for the display
NOTE: If no options are provided, the entire log is displayed.
Output
The default output display shows the record number, time stamp, source, and
description. The timestamp begins at midnight, January 1 and increases until
the system boots. After the system boots, the system’s timestamp is used.
Sample Output
Record: 1
Date/Time: Dec 8 08:10:11
Source: login[433]
Description: root login from 143.166.157.103
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM