Users Guide

RACADM Subcommand Overview 249
Examples
• racadm config -g cfgLanNetworking -o
cfgNicIpAddress 10.35.10.100
Sets the cfgNicIpAddress configuration parameter (object) to the value
10.35.10.110. This IP address object is contained in the group
cfgLanNetworking .
•
racadm config -f myrac.cfg
Configures or reconfigures the DRAC 5. The myrac.cfg file may be created
from the
getconfig command. The myrac.cfg file may also be edited
manually as long as the parsing rules are followed.
NOTE: The myrac.cfg file does not contain password information. To include
this information in the file, it must be input manually. If you want to remove
password information from the myrac.cfg file during configuration, use the -p
option.
getconfig
getconfig Subcommand Description
The getconfig subcommand allows the user to retrieve DRAC 5 configuration
parameters on an individual basis, or all the RAC configuration groups may
be retrieved and saved into a file.
Input
Table A-6 describes the getconfig subcommand options.
NOTE: The -f option without a file specification will output the contents of the file to
the terminal screen.