Users Guide

RACADM Subcommand Overview 247

config

NOTE: To use the getconfig command, you must have Log In DRAC 5 permission.

Table A-4 describes the config and getconfig subcommands.

Synopsis

racadm config [-c|-p] -f <filename>

racadm config -g <groupName> -o <objectName> [-i

Supported Interfaces

•Local RACADM

• Remote RACADM

• telnet/ssh/serial RACADM

Description

The config subcommand allows the user to set DRAC 5 configuration

parameters individually or to batch them as part of a configuration file. If the

data is different, that DRAC 5 object is written with the new value.

Input

Table A-5 describes the config subcommand options.

NOTE: The -f and -p options are not supported for the serial/telnet/ssh console.

Table A-4. config/getconfig

Subcommand Definition

config Configures the DRAC 5.

getconfig Gets the DRAC 5 configuration data.