Users Guide

Using GUI Console Redirection 181
Why is it that
sometimes I do not
see the “Video OFF”
or “Video OFF in 15”
status on the server
LCD screen?
The local video status is a low-priority message and will get
masked if a high priority server event has occurred. The
LCD messages are based on priority; you must resolve any
high-priority LCD messages and once that event is cleared
or resolved, the next low priority message is displayed. The
server video message on the LCD screen is informational in
nature.
Where can I get more
information on the
Local Server Video
feature?
There will be a white paper discussing this feature on the
Dell Support website located at support.dell.com.
I see video corruption
on my screen. How do
I fix this issue?
In the Console Redirection window, click Refresh to
refresh the screen.
NOTE: Clicking Refresh several times may be required to
correct the video corruption.
During Console
Redirection, the
keyboard and mouse
became locked after
coming back from
hibernation on a
Windows 2000
system. What caused
this to happen?
To resolve this issue, you must reset the DRAC 5 by
running the racadm racreset command.
I cannot see the
bottom of the system
screen from the
Console Redirection
window.
Ensure that the management station’s monitor resolution
is set to 1280x1024.
Table 7-7. Using Console Redirection: Frequently Asked Questions
(continued)
Question Answer