Users Guide

178 Using GUI Console Redirection
Adjusting the Video Quality
The Video Viewer provides video adjustments that allow you to optimize the
video for the best possible view. Click Help for more information.
To automatically adjust the video quality, perform the following steps:
1
Access the Viewer Menu Bar. See "Accessing the Viewer Menu Bar" on
page 175.
2 Click Tools and select Automatic Video Adjust .
The video quality is recalibrated, and the session viewer reappears.
To manually adjust the video quality, perform the following steps:
1
Access the Viewer Menu Bar. See "Accessing the Viewer Menu Bar" on
page 175.
2 Click Tools and select Manual Video Adjust .
3 In the Video Adjustment window, click each video adjustment button and
adjust the controls as needed.
When you manually adjust the video quality, observe the following
guidelines:
• To prevent the mouse pointers from desyncronizing, adjust the horizontal
setting so the remote system’s desktop is centered in the session window.
• Reducing the Pixel Noise Ratio setting to zero causes multiple video
refresh commands that generates excessive network traffic and flickering
video in the
Video Viewer window . Dell recommends that you adjust the
Pixel Noise Ratio setting at a level that provides optimal system
performance and pixel enhancement while minimizing network traffic.
Synchronizing the Mouse Pointers
When you connect to a remote Dell system using Console Redirection, the
mouse acceleration speed on the remote system may not synchronize with the
mouse pointer on your management station, causing two mouse pointers to
appear in the Video Viewer window.
To synchronize the mouse pointers, perform the following steps:
1
Access the Viewer Menu Bar. See "Accessing the Viewer Menu Bar" on
page 175.
2 Click Tools and select Session Options .