Users Guide

120 Configuring the DRAC 5 Using the Web User Interface
HTTP Port Number The port used by the DRAC that listens for a server
connection. The default setting is 80.
HTTPS Port Number The port used by the DRAC that listens for a server
connection. The default setting is 443.
Table 4-39. SSH Settings
Setting Description
Enabled Enables or disables SSH. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Up to four sessions are supported.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The Secure Shell idle timeout, in seconds. Range = 60 to
1920 seconds. Enter 0 seconds to disable the Timeout
feature. The default setting is 300.
Port Number The port used by the DRAC that listens for a server
connection. The default setting is 22.
Table 4-40. Telnet Settings
Setting Description
Enabled Enables or disables Telnet. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. Up to four sessions are supported.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The Secure Shell idle timeout, in seconds. Range = 60 to
1920 seconds. Enter 0 seconds to disable the Timeout
feature. The default setting is 0.
Port Number The port used by the DRAC that listens for a server
connection. The default setting is 23.
Table 4-38. Web Server Settings
(continued)
Setting Description