Users Guide

Configuring the DRAC 5 Using the Web User Interface 119
• Remote RACADM (Table 4-41)
• SNMP agent (Table 4-42)
• Automated System Recovery Agent (Table 4-43)
Use the
Automated Systems Recovery Agent to enable the Last Crash
Screen
functionality of the DRAC 5.
NOTE: Server Administrator must be installed with its Auto Recovery feature
activated by setting the Action to either: Reboot System, Power Off System, or
Power Cycle System, for the Last Crash Screen to function in the DRAC 5.
4 Click Apply Changes .
5 Click the appropriate Services page button to continue. See Table 4-44.
Table 4-37. Local Configuration Settings
Setting Description
Disable the DRAC local
configuration using option
ROM
Disables local configuration of the DRAC 5 using
option ROM. The option ROM prompts you to
enter the setup module by pressing <Ctrl+E>
during system reboot.
Disable the DRAC local
configuration using RACADM
Disables local configuration of the DRAC 5 using
local RACADM.
Table 4-38. Web Server Settings
Setting Description
Enabled Enables or disables the Web server. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The time in seconds that a connection is allowed to
remain idle. The session is cancelled when the timeout is
reached. Changes to the timeout setting do not affect the
current session. When you change the timeout setting,
you must log out and log in again to make the new setting
effective. Timeout range is 60 to 1920 seconds.