Users Guide

118 Configuring the DRAC 5 Using the Web User Interface
Configuring Services
NOTE: To modify these settings, you must have Configure DRAC 5 permission.
Additionally, the remote RACADM command-line utility can only be enabled if the
user is logged in as root.
1 Expand the System tree and click Remote Access.
2 Click the Configuration tab and then click Services.
3
Configure the following services as required:
• Local Configuration (Table 4-37)
• Web server (Table 4-38)
• SSH (Table 4-39)
• Telnet (Table 4-40)
Table 4-35. Serial Over LAN Configuration Advanced Settings Page Settings
Setting Description
Character Accumulate
Interval
The amount of time that the BMC will wait before
transmitting a partial SOL character data package.
1-based 5ms increments.
Character Send
Threshold
The BMC will send an SOL character data package
containing the characters as soon as this number of
characters (or greater) has been accepted. 1-based units.
Table 4-36. Serial Over LAN Configuration Advanced Settings Page Buttons
Button Description
Print Prints the Serial Over LAN Configuration Advanced
Settings page.
Refresh Refreshes the Serial Over LAN Configuration Advanced
Settings page.
Go Back To Serial
Over LAN
Configuration Page
Returns to the Serial Over LAN Configuration page.
Apply Changes Applies the Serial Over LAN Configuration Advanced
Settings page settings.