Users Guide

Configuring the DRAC 5 Using the Web User Interface 117
4 Click Apply Changes .
5 Configure the advanced settings, if required. Otherwise, click the
appropriate
Serial Over LAN Configuration page button to continue (see
Table 4-34).
To configure the advanced settings, perform the following steps:
a Click Advanced Settings .
b In the Serial Over LAN Configuration Advanced Settings page,
configure the advanced settings as required. See Table 4-35.
c Click Apply Changes .
d Click the appropriate Serial Over LAN Configuration Advanced
Settings
page button to continue. See Table 4-36.
Table 4-33. Serial Over LAN Configuration Page Settings
Setting Description
Enable Serial Over
LAN
Enables Serial Over LAN. Checked=Enabled;
Unchecked=Disabled.
Baud Rate The IPMI data speed. Select 9600 bps, 19.2 kbps, 57.6
kbps, or 115.2 kbps.
Channel Privilege
Level Limit
Sets the IPMI Serial Over LAN minimum user privilege:
Administrator, Operator, or User.
Table 4-34. Serial Over LAN Configuration Page Buttons
Button Description
Print Prints the Serial Over LAN Configuration page.
Refresh Refreshes the Serial Over LAN Configuration page.
Advanced Settings Opens the Serial Over LAN Configuration Advanced
Settings page.
Apply Changes Applies the Serial Over LAN Configuration page settings.