Users Guide

Configuring the DRAC 5 Using the Web User Interface 115
Configuring Terminal Mode
1 Expand the System tree and click Remote Access .
2 Click the Configuration tab and then click Serial .
3 In the Serial Configuration page, click Terminal Mode Settings .
4 Configure the terminal mode settings.
Table 4-31 provides information about the terminal mode settings.
5 Click Apply Changes .
6 Click the appropriate Terminal Mode Settings page button to continue.
See Table 4-32.
History Buffer Size The size of the serial history buffer, which holds the last
characters written to the console. The maximum and
default = 8192 characters.
Login Command The DRAC command line to be executed upon valid
login.
Table 4-30. Serial Configuration Page Settings
Button Description
Print Print the Serial Configuration page.
Refresh Refresh the Serial Configuration page.
Apply Changes Apply the IPMI and RAC serial changes.
Termina l Mode
Settings
Opens the Terminal Mode Settings page.
Table 4-29. RAC Serial Settings
(continued)
Setting Description