Users Guide

100 Configuring the DRAC 5 Using the Web User Interface
Table 4-8. IPMI User Privileges
Property Description
Maximum LAN User
Privilege Granted
Specifies the user’s maximum privilege on the IPMI
LAN channel to one of the following user groups:
Administrator, Operator, User, or None.
Maximum Serial Port
User Privilege Granted
Specifies the user’s maximum privilege on the IPMI
Serial channel to one of the following: Administrator,
Operator, User, or None.
Enable Serial Over LAN Allows user to use IPMI Serial Over LAN. When
checked, this privilege is enabled.
Table 4-9. DRAC User Privileges
Property Description
DRAC Group Specifies the user’s maximum DRAC user privilege to
one of the following: Administrator, Power User, Guest
User, None, or Custom.
See Table 4-10 for DRAC Group permissions.
Login to DRAC Enables the user to log in to the DRAC.
Configure DRAC Enables the user to configure the DRAC.
Configure Users Enables the user to allow specific users to access the
system.
Clear Logs Enables the user to clear the DRAC logs.
Execute Server Control
Commands
Enables the user to execute racadm commands.
Access Console
Redirection
Enables the user to run Console Redirection.
Access Virtual Media Enables the user to run and use Virtual Media.
Test Alerts Enables the user to send test alerts (e-mail and PET) to
a specific user.
Execute Diagnostic
Commands
Enables the user to run diagnostic commands.