Users Guide

DRAC 5 Property Database Group and Object Definitions 255
Description
Root domain of the Domain Forest.
cfgIpmiSerial
This group specifies properties used to configure the IPMI serial interface of the BMC.
cfgIpmiSerialConnectionMode (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
0 (Terminal)
1 (Basic)
Default
1
Description
When the DRAC 5 cfgSerialConsoleEnable property is set to 0 (disabled), the DRAC 5 serial port
becomes the IPMI serial port. This property determines the IPMI defined mode of the serial port.
In Basic mode, the port uses binary data with the intent of communicating with an application program
on the serial client. In Terminal mode, the port assumes that a dumb ASCII terminal is connected and
allows very simple commands to be entered.
cfgIpmiSerialBaudRate (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.
Legal Values
9600, 19200, 57600, 115200
Default
57600
Description
Specifies the baud rate for a serial connection over IPMI.
cfgIpmiSerialChanPrivLimit (Read/Write)
NOTE: To modify this property, you must have Configure DRAC 5 permission.