Users Guide

DRAC 5 Overview 19
Using the management and MII cables, you can configure your DRAC in three separate modes,
depending on your needs. See "DRAC Modes" in "Using the RACADM Command Line Interface" for
more information.
DRAC 5 Ports
Table 1-2 identifies the ports used by the DRAC 5 that listen for a server connection. Table 1-3 identifies
the ports that the DRAC 5 uses as a client. This information is required when opening firewalls for
remote access to a DRAC 5.
Table 1-2. DRAC 5 Server Listening Ports
Port Number Function
22* Secure Shell (SSH)
23* Tel net
80* HTTP
161 SNMP Agent
443* HTTPS
623 RMCP/RMCP+
3668* Virtual Media server
3669* Virtual Media Secure Service
5900* Console Redirection keyboard/mouse
5901* Console Redirection video
* Configurable port
Table 1-3. DRAC 5 Client Ports
Port Number Function
25 SMTP
53 DNS
68 DHCP-assigned IP address
69 TFTP
162 SNMP trap
636 LDAPS
3269 LDAPS for global catalog (GC)