Users Guide

RACADM Subcommand Overview 183
config
NOTE: To use the getconfig command, you must have Log In DRAC 5 permission.
Table A-4 describes the config and getconfig subcommands.
Synopsis
racadm config [-c|-p] -f < filename >
racadm config -g <
groupName > -o < objectName > [-i < index >] < Value >
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Description
The config subcommand allows the user to set DRAC 5 configuration parameters individually or to
batch them as part of a configuration file. If the data is different, that DRAC 5 object is written with the
new value.
Input
Table A-5 describes the config subcommand options.
NOTE: The -f and -p options are not supported for the serial/telnet/ssh console.
Table A-4. config/getconfig
Subcommand Definition
config Configures the DRAC 5.
getconfig Gets the DRAC 5 configuration data.
Table A-5. config Subcommand Options and Descriptions
Option Description
-f The -f
<filename> option causes config to read the contents of the file specified by
<filename> and configure the DRAC 5. The file must contain data in the format
specified in "Parsing Rules."
-p The -p, or password option, directs config to delete the password entries contained in the
config file -f
<filename> after the configuration is complete.
-g The -g
<groupName>, or group option, must be used with the -o option. The
<groupName> specifies the group containing the object that is to be set.